Skip to main content
  • Regulatory Update

UK MHRA Issues New Guidance on UK REP and Medical Device Regulatory Compliance

The UK Medicines and Healthcare products Regulatory Agency (MHRA) has posted new guidance regarding medical devices placed on the market in Great Britain

London Bridge at dusk

September 3, 2020

The UK Medicines and Healthcare products Regulatory Agency (MHRA) has posted new guidance regarding medical devices  placed on the market in Great Britain (and Northern Ireland and European Union (EU)) starting January 1, 2021. This is of course in the event of an anticipated hard Brexit.

MHRA continues to be king!

The MHRA continues to be the central authority for medical device market oversight in the UK. There is of course expected to be new legislation, which requires parliamentary approval and codifies this proposed guidance.

UK as a third country

After this no-deal Brexit the UK will be considered a third country. This means that UK-based manufacturers need an Authorized Representative and importer, both located in the EU-27. Although that process is clear and well understood in the market, UK-based manufacturers should realize that mandating an Authorized Representative takes time. They should start working on this as soon as possible.

This change also means UK-based Notified Bodies will no longer be able to issue CE Mark certificates. This has been communicated well ahead of the initial Brexit deadline of March 29th, 2019, so most manufacturers will have moved their certificates to EU-27 based Notified Bodies already.

European CE Marking valid until June 30, 2023

First and foremost, EU CE Marking will be recognized through June 30, 2023. Similarly, CE Marking certificates issued under current Medical Device Directives (MDD, AIMDD and IVDD) by Notified Bodies based in European Economic Area (EEA) countries will remain valid until June 30, 2023. Compliance to the Medical Devices Regulation (MDR) and/or In-vitro Diagnostic Medical Devices Regulation (IVDR) would be deemed acceptable, as well.

UKCA mark required for all devices after June 30, 2023

Obviously MHRA is likely to lose access to current and new EU data exchange for medical devices in case of a no-deal situation. Therefore the UKCA (UK Conformity Assessed) mark is introduced. On June 30, 2023, CE-marked devices must be compliant to the new legislation and must possess the UKCA. This includes a labelling change.

The UK regulatory system envisages self-certification for medical devices which are Class I self-certified or general IVDs (self-affixing the UKCA mark once compliant to the new legislation). Higher-risk medical devices and IVDs will require approval from a UK Approved Body and issuance of a UKCA certificate to affix the UKCA mark. Apparently, existing UK Notified Bodies with designations under the MDD, IVDD or AIMDD “will have their designations rolled over automatically,” and become UK Approved Bodies. However, EU-based Notified Bodies will not be able to issue UKCA certificates.

Manufacturers can voluntarily comply under the new legislation in advance of June 30, 2023 and of course, devices which were never compliant to the European Directives or Regulations would need to be compliant to the new legislation after January 1, 2021.

New UK registration requirements

In addition, on January 1, 2021 there are new MHRA registration requirements for devices placed on the UK market. Before panic ensues, manufacturers should know that the requirements are phased in based on risk class.

The grace periods are as follows:

  • 4 months: Class III and Class IIb implantables, active implantable medical devices, IVD List A
  • 8 months: other Class IIb, Class IIa devices, IVD List B, self-testing IVD
  • 12 months: Class I devices, general IVDs

Note these time frames do not apply to medical devices already subject to notification to the MHRA because the manufacturer or Authorized Representative is based in the UK.

Special status for Northern Ireland

Northern Ireland will have a special status as EU rules will keep applying there, although it is no longer part of the EU market. This basically means that CE Marking is required for the Northern Irish market, with an EU-based manufacturer or Authorized Representative appointed. CE Mark certification must be done by an EU-based Notified Body. The UKCA certification does not apply. Where a device has been assessed by a UK Approved Body, the UK(NI) mark will accompany, but not replace, the CE Mark. Products carrying both the CE Mark and UK(NI) mark cannot be placed on the EU market. UKCA marked devices will not be accepted on the Northern Irish market unless accompanied by the CE Mark or the UK(NI) mark.

Registration of economic operators and devices depends on the location of the economic operator involves several considerations:

  • If the manufacturer is located in Northern Ireland, the firm must register itself and all devices with the MHRA;
  • If the manufacturer is located in the UK but not in Northern Ireland, the company must register itself and the devices with the MHRA and also appoint an Authorized Representative. If the Authorized Representative is located in Northern Ireland, that representative must register with the MHRA. If the Authorized Representative is located in another Member State, the representative must register in that country.
  • If the manufacturer is located in the EU or EEA, the firm must appoint a UK Responsible Person who must be located in the UK, including Northern Ireland.
  • If the manufacturer is based outside the UK, Northern Ireland, the EU or the EEA, they must appoint a UK Responsible Person (see below), unless they have appointed an Authorized Representative who is based in Northern Ireland. Once this Authorized Representative has registered itself and the devices with the MHRA, those devices can be placed in the UK market.

New UK Responsible Person (UK REP)

Related to the new registration requirements, manufacturers based outside the UK must designate a UK Responsible Person (UK REP). The timeline for this designation is aligned with the grace periods for registration with MHRA, as one of the responsibilities is registration of the non UK-based manufacturer. Further, some of the responsibilities delineated in the guidance appear to align with the MDR and IVDR Authorized Representative role:

  • Ensure that the Declaration of Conformity (DOC) and technical documentation exist;
  • “Keep available a copy” of these documents and relevant certificates;
  • Ensure application of appropriate conformity assessment procedures; and
  • Cooperate with the MHRA’s request for documents, et al.

Unclear position of UK REP

The UK legislation presented in 2019, from which above tasks for the UK REP have been taken, also links the responsibility of placing medical devices on the British market with the UK REP. Obviously that is the task of the importer, and this legislation indeed defines the importer as such. Based on that, it looks as if the importer and the UK REP are the same person. This would of course result in an undesired mixing of roles of economic operators. MHRA has informed Emergo by UL that this issue is still being discussed. Emergo recommends that industry wait on setting up arrangements until this clarity has been provided.

Labeling Expectations

The UK does not impose rigorous expectations on labeling, and essentially medical devices would be labelled based on compliance. On January 1, 2021, a device must be labeled with either the EU CE marking or UKCA mark. On July 1, 2023, the UKCA mark will be obligatory for all devices. Provided the product were compliant with both the EU legislation and the new UK legislation, it would be acceptable after July 1, 2023 for a product to be labelled with both CE Marking and UKCA mark.

It is not clear if the name and place of business for the importer and UK Responsible Person must be added to the label. The guidance document does not provide that level of detail and the proposed legislation only refers to Annex I of the European Directives or Regulations, where such labelling requirements are linked to EU market. It is likely that the UKCA requirements include UK addresses on the user information.

Conclusion: Waiting and seeing

Again, the above is in the event there is a hard BREXIT. Emergo by UL will continue to monitor developments and share details as they become available. We’re particularly intrigued about the possibilities for our UK REP service. However, industry would be best served to wait for additional clarity from MHRA in terms of navigating the post-Brexit regulatory environment.

Evangeline Loh, Ph.D., RAC is Global Regulatory Manager and Ronald Boumans is Senior Consultant, Regulatory Affairs at Emergo by UL.

Related UK and European medical device regulatory resources from Emergo by UL:

  • European Authorized Representative (EC REP) in-country representation
  • Brexit transition consulting for medical device and IVD manufacturers
  • Whitepaper: How medical device and IVD companies can prepare for a no-deal Brexit
X

Request more information from our specialist

Thanks for your interest in our products and services. Let's collect some information so we can connect you with the right person.

Please wait…